EDS-2 Bundle

for Mac

Key Features & Specifications

McCAD Schematics DS

Runs on any Macintosh computer with a 68030 or newer processor:
Operating System: Requires System 7.1 or later.
Revision Series 3.6:
The "user friendly" Macintosh environment allows rapid acclamation to computer-aided drafting.
McCAD Schematics D.S. utilizes a high level modeling language
Pins can be bidirectional
Variables can be customized
It is possible to allocate true RAM for simulation
The simulation software can handle up tp 128 pins per device
A scrolling window is provided to view the digital simulator output
The digital simulator handles passive devices such as resistors, capacitors and inductors
The user can set the trigger conditions
The user can set the pre/post trigger record length
Multiple monitor debug windows are available
The display and stimulus devices are interactive.
Multi-Page project files can be simulated
On Screen Probes
On Screen Timing Display
Up to 64 Channels Monitored
Continuous Interactive Simulation
User Definable Propagation Delays
Selectable Recording modes
Simulate PALs, GALs, PLDs & ASICs
Integrated Function Compiler
Integrates with all McCAD Products

McCAD Schematics D.S. also contains all of these standard McCAD Schematics features.

Operating system; Mac OS; System 7.1 or later
Multi-sheet documents can be linked to a project file for which a single net list and parts list can be extracted.
An on-line Library editor allows you to create new symbols without leaving the design environment.
Automatic label sequencing eliminates the problem of conflicting net names and reference designators.
The auto-name incrementing feature allows quick connection when creating break-out wires from busses.
McCAD Schematics supports "intelligent bussing". Each bus "knows" what signals it carries. On-line monitoring avoids accidental misconnections and movement of bus structures results in automatic update of all break-outs. Busses are automatically managed across multi-sheet documents.
Intelligent tie-point management results in fast dynamic updates when junctions are removed.
An Auto Interconnect Routing Engine automatically routes and connects devices across long distances.
Three interconnection techniques (automatic, semiautomatic and manual) are supported, allowing flexible and rapid design.
Device packaging is supported for both single and multiple sheets. The user can design at the gate or function level and then let McCAD Schematics package the design into real world devices.
Drafting speed is enhanced by allowing adjustment of individual wires while multiple objects are selected.
Devices and associated text can be rotated during and after placement.
A Library move and sort program is provided with your McCAD Schematics package.
PICT format graphics can be imported and exported via the Clipboard.
Schematics can be exported in PICT format.
ASCll database files may be imported and exported.
User configured report generation.
Libraries - Thousands of standard components, CMOS, TTL, Discretes, etc., provided
Output documents; Schematic drawings, Net list, Wire list, Parts list, User Reports
Input Devices; mouse, keyboard, graphics tablet
Title Block; custom block creation
Output devices; Mac OS compatible printers, Pen plotters (HPGL & DMP)
Zoom and Scaling; 10% to 900%; standard preset and user definable
Built-in Grids
Auto Grid - snap to nearest grid
ECO - Engineering Change Order manager. Links to McCAD PCB-ST/ EDS Layout packages
Optional Xilinx Libraries
Optional OrCAD to McCAD Translator
Optional DXF Output Format

McCAD PCB-ST

Operating Systems

Runs on any Macintosh computer with a 68030 or newer processor
Requires System 7.1 or later.

Revision Series

PCB-ST 2.3

Data Base

Resolution: 0.001"
Placement to: 0.001"
Netlist Driven
Graphic Input : By Mouse or Tablet

Grids

Number of defined grids: 16
Variable grids (user definable): 1-1000 mils
Supports Metric
Grid Snap
Off Grid Placement
Grid Style: Choice of Point or Standard Type

Zoom & Scaling

Preset view scales; 8
User determined view scale
View board command
Linear Zoom In/Out (surround view)

On-Line Management

Net Query & Editing
Part Query & Editing
Net List connection violations
E.C.O. (Electronic Change Order) cross environment manager
Library Editor Window

Autorouting

Internal Point to Point low level router
Optional Mid-Level Router (Tracker)
Optional High Performance Route (Trailblazer)

Utilities

Ground plane generation
Auto footprint replace
Automatic inter-layer item movement
Automatic solder mask creation
Automatic design rule check
Net List Compare/ Verify/ Append
Find utilities: part name, ref desig., net
Global Modify
Radial pattern construction Macros
Element modification after placement
Data Base Re-Pack
Data Base Sort
Custom SMT Macro Generator
Full DRC - Both Physical and Electrical
SMT Power Plane Connection Dispersion Macros

Editing tools

Cut, Copy & Paste
X Y locator, relative and absolute
Rulers
Grouping on the Fly Horizontal & vertical device mirror
Horizontal & vertical board mirror
Rubberbanding
Stretch lines
Auto VIA insertion
Inter-Layer Linking for SMT mgmt.
Auto Net Labeling
Auto Part Labeling
Import Via Clipboard
Export Via Clipboard
User programmable parameter Menus
Rotation increments - Standard 90 degree
Definable rotation increment; 1 degree on most geometries

Design Limits

Board size limit: 32" x 32"
Single, double sided and multilayer
Double sided SMT
Max board layers per file: 32
Max board layers (system limit): 32
User Library size (symbol quantity): 127 /lib
Quantity of library symbols included 4000+; standard and SMT
Color and Monochrome capabilities

Text

Normal and vectored fonts
Text on design
Text edit on design after placement
Text on Silkscreen
Number of Fonts: up to 73
User Definable Fonts: 73
Font Rotation
Font Mirror
Re-Editable Text Strings

Input

Mouse
Graphics Tablet (via ADB or USB)
Keyboard

Input Files

Automatic parts placement
Automatic net list input
Net list with auto ground plane connect
Trailblazer Route File
Tracker Route File
ASCll text files
Vector PICT (via Clipboard)

Tooling Control

Printer/plotter composite memories: 30
User Definable

Output Documents

Check Plots & Prints
PWB output: pads, traces, vias and masks on all layers
Silkscreen
Net list, parts list output
Drill list, Excellon drill tape output
Component location for auto assy equip.
Trailblazer & Tracker Documents
ASCll Design Dump
ASCII Plotter File Dump
User Library reports
Save as PICT
Gerber File for photo plot
Optional DXF Output
Mult-Wire Autotest HP3960

Output Drivers

Mac OS compatible Printers
Pen Plotter drivers for HPGL & DMP
Gerber Photo Plot

Library Editor

Custom symbols creation
On Line Editing
Separate design window
User definable
External libraries

Gerber Translator

Time Saving Features

Automatically extracts an aperture table of the most frequently used apertures from the file to be converted.
Automatic pre-sort and loading of Gerber Tool D-codes based on either a particular layer or all layers combined.
Separation of DRAW and FLASH Apertures.
Up to 800 different Gerber Tool Tables can be stored for later use or reference.
Gerber data can be output directly via the printer port or saved to disk for later use in either VERBOSE or TERSE formats.
The software also provides auto-matic segmentation of Gerber data files when a diskette becomes full and also provides automatic labeling of generated Gerber data files.
Gerber 2/3 Resolution Format.

For any additional product, pricing or ordering information please call

Vamp, Inc. at Tel: 323-466-5533 or Fax to 323-466-8564.

All prices and specifications are subject to change without notice.